Sonar Chart Mode; Sonar Page & Sonar Chart Display Options - Lowrance LCX-17M Installation And Operation Instructions Manual

To adjust sensitivity in manual mode:
1. First, turn off Auto Sensitivity: from the Sonar Page, press
to
A S
UTO ENSITIVITY
2. Press ↑ to
Press ↓ or ↑ to pick a different sensitivity setting. When it's set at the
desired level, press
To turn Auto Sensitivity back on:
From the Sonar Page, press
NOTE:
To return to the original factory setting for Auto Sensitivity, see the
entry in this section on Reset Options. If sensitivity is in manual
mode, the Reset Options command will switch back to Auto and
reset the factory setting at the same time.
Tip:
For quicker sensitivity adjustments, try leaving the Sensitivity
Control Bar on the screen as the chart scrolls. You can see the
changes on the screen as you press the up or down arrows. This is
handy when there's a lot of clutter in the water, and you are
matching the sensitivity to rapidly changing water conditions.

Sonar Chart Mode

The default color scheme for the sonar chart is grayscale, but we offer
other variations to suit your viewing preferences. The chart can be
displayed in
FishReveal.
To change the chart mode:
1. From the Sonar Page, press
→ ↓ to
2.
. Press
3. Press ↓ or ↑ to
4. Press |
EXIT
Sonar Page & Sonar Chart Display Options
The Pages Menu offers five chart display options for units with dual-
frequency transducers and four options for units with single-frequency
transducers. To access them, press
| .
Name EXIT
| .
ENT
|
S ENT
ENSITIVITY
.
EXIT
Grayscale,
S C
ONAR HART
Mode Name
to return to the Sonar Page.
EXIT
and the Sensitivity Control Bar appears.
|↓ to
MENU A
UTO
Reverse Grayscale,
|↓ to
MENU
| .
M ENT
ODE
| .
ENT
PAGES
83
|
S ENT
ENSITIVITY
Bottom
S F
ONAR EATURES
|← or→ to
S
ONAR
|↓
MENU
| .
EXIT
Black or
| .
ENT
|↓ to
Option