Spin Only - LG WD-12470BD Owner's Manual

H ow to use the washer
Start/Pause
1. Start
• This Start/Pause button is used to start
wash cycle or pause the wash cycle.
2. Pause
• If temporary stop of wash cycle is needed,
press "Start/Pause" button.
• When in Pause, the power is turned off
automatically after 4 minutes.
• NB. The door will not open before 1 to 2
minutes when Pause is selected,
or at the end of the wash cycle.
Door Lock
• Lights whenever the door of the washer is
locked.
• The door can be unlocked by pressing the
Start/Pause button to stop the washer.
• The door can be opened after a short delay.
Detecting
• While the "Detecting" is shown in the
display the machine rotates slowly and
detects how many laundries are loaded in
the drum. It will take a few seconds.
• Available in Cotton and Synthetic program.
Option
• By pressing the option
button, only one option
functions may be selected.
1. Pre Wash
• Use this option for loads that need
pretreatment. This adds 17 minutes of pre
washing before draining.
- When using Pre Wash option, do not use a
liquid detergent for the main wash.
Use powder for the main wash.
• Available in Cotton, Synthetic and Baby
Care program.
2. Rinse+Spin
• Use this option to rinse and then spin.

3. Spin Only

• When you want Spin only, select the this
opton.
4. Less Steam
• When you want to do a steam wash for
only a small amount of laundry, select the
this opton.
• Available in Cotton, Synthetic and Baby
Care program.
• Temperature fixed 30°C.
5. Eco Steam
• When you want to do a steam wash while
reducing the electricity consumption,
select the this opton.
• Available in Cotton, Synthetic and Baby
Care program.
• Temperature fixed 40°C.
The required lamp will light up for
identification.
17