Changing The Preset Programmes - Danfoss 103E7 Installation & User's Instructions

Changing the preset programmes

Your installer will have set your unit to operate in one of the
following modes:
7 day - diff erent settings for each day of the week
(page 16-17) - default setting.
5/2 day - one set of programmes for weekdays and another
for weekends (page 18-19) .
!
Please follow the correct instructions to programme your unit.
Please Note
The unit must be programmed in sequence and ON/OFF
times cannot be set out of sequence.
If you want to leave a preset time as it is, simply press NEXT
ON/OFF to move on to the next setting.
Your clock will allow you to programme 3 ON/OFF settings
per day. If you do not wish to use one of the ON/OFF
settings, simply programme the ON time to be the same as
the OFF time and the setting will not operate.
!
If at any time you get confused and need to reset your
timings to the standard preset programme, press the R/S
button to return to the preset programmes.
16