Dual XDMA760BT Installation & Owner's Manual page 19

Disconnecting a
Manual Dialing
Recent Calls List
Redialing the last number
Receiving a Phone Call
Ending a Phone Call
Streaming Audio
XDMA760BT
Bluetooth Operation
Press and hold
Device connected device. The device will remain paired and appear
in the SEARCH menu, but not be connected.
Press
display. Using the remote control, enter the phone number
using the 0-9 buttons. Press
control or front panel to begin dialing.
Note: Placing a phone call from your cell phone will also
initiate Bluetooth function.
Press SELECT from Bluetooth mode to view recent calls
dialed, received or missed while connected to the head unit.
Turn the volume knob to cycle through the recent phone
numbers. Press SELECT or
To redial the last phone number, press
Bluetooth mode. Press
phone number.
Incoming phone calls will automatically appear on the
display and a ring tone will be heard.
Note: The volume of the ring tone depends on the volume
level of the head unit and may not be heard if the volume is
set to a low level or mute is activated.
• Press
• Press and hold
Note: If Auto Answer is set to ON in the setup menu, all
phone calls will be received automatically.
During an active phone call, press
If the phone call was received when listening to music
in another mode, the head unit will resume the previous
mode.
The head unit supports A2DP wireless streaming audio
from a Bluetooth mobile device directly to your head unit.
The following functions can be used to control the music:
• Press
• Press
• Press
playback.
for 3 seconds to disconnect a
once. "Enter Phone Number" appear on the
to receive the incoming phone call.
to refuse the incoming phone call.
ll
to skip to the next available audio track.
nn
to skip to the previous audio track.
l
/ II to toggle between play and pause during
19
or SELECT on the remote
to dial the number.
two times from
or SELECT again to redial the
to end a phone call.