Kling-Net Mapper; Part 1: Confirm Network Connectivity - Chauvet nexus 4x1 User Manual

Kling-Net
Mapper
Part 1: Confirm
Network
Connectivity
Nexus™ 4x1 User Manual Rev. 3
Kling-Net Mapper is part of the Arkaos software package and is used to inform The ArKaos
software about the layout of the Nexus™ 4x1 panels. This process is called mapping.
Kling-Net Mapper and ArKaos software can be run simultaneously allowing the operator to
see immediately the effects of the mapping on the live presentation. However, Kling-Net
Mapper does not need to be active for Arkaos software to work. For more information, see
ArKaos manuals at http://arkaospro.com.
The following section provides step-by-step instructions for mapping the Nexus™ 4x1 panels
and informing ArKaos software of the mapping.
1. Connect the Arkaos computer and Nexus™ 4x1s to the same network. For more
information, see Ethernet Connections
2. Set the all the Nexus™ 4x1s to Kling-Net operating mode. For more information, see
Kling-Net.
3. Open the ArKaos Kling-Net Mapper. All the Kling-Net™ devices populate a list on the left
side of the screen in the Connected Devices window
Diagram.
Operation
-21-