Inside Cabinet Installation - Weber Spirit E210 CLASSIC Owner's Manual

INSIDE CABINET INSTALLATION

You will need: cylinder brackets (1).
A) Lift and remove cabinet screen. The cylinder brackets
snap into the mounting holes in the bottom panel as
shown in the illustration (2). Insert cylinder bracket
tabs into rectangular slots. Secure brackets in place
by pivoting them down to lock centre tab in place.
B) Lift and place the cylinder between the cylinder
brackets (3) on the bottom panel. The base of the
cylinder must fit between the cylinder brackets (4).
C) Turn the cylinder so the valve opening faces the front
of the grill.
D) Connect the regulator to the LPG cylinder. Refer to
E) Replace cabinet screen.
LPG CYLINDER INSTALLATION INSIDE CABINET
1
2
3
4
WWW.WEBER.COM
®
11