To avoid hazard to children, dispose of the product’s plastic packaging carefully. • Please read all the instructions before using this product. • Safety Instructions IPF-2600 User’s Manual/ 使 用 手 冊 使 用 手 冊 使 用 手 冊 使 用 手 冊...
Ⅰ Ⅰ Ⅰ Ⅰ . Product Features The ArtDio IPF-2600 is the latest generation of Enterprise IP Phone that supports SIP (Session Initiation Protocol , the innovative technology and excellencies in engineering deliver the best voice quality and ) multiple control functionality.
One end of the RJ-45 cable into the LAN port on the router (or the LAN port of the hub connected to the Router), then the other end connect to the WAN port on the IPF-2600 IP Phone. As the following image: IPF-2600 User’s Manual/...
Page 10
If the network environment does not have a router, the IPF-2600 router should been enabled. One end of the RJ-45 cable into the WAN port on IPF-2600, the other end into Internet port on the ADSL modem, and the LAN port of the IPF2600 could connect to a computer or a hub, as the following image: When the phone is installed, the LCD will display the connection status to let the users understand the connection status.
Page 11
IPF2600 can be wall mounted. There are two wall mount holes on the bottom of the IPF2600 main body: User can simply place the device against the wall with two holes placed to the fixed hanger position on the wall IPF-2600 User’s Manual/ 使 用 手 冊 使 用 手 冊...
Damages to the phone caused by using other unsupported power adaptors are not covered by the manufacturer’s warranty. ArtDio has a reseller agreement with our reseller customer. End user should contact the company from whom you purchased the product for replacement, repair or refund. If you purchased the product directly from ArtDio, contact your ArtDio Sales and Service Representative for a RMA (Return Materials Authorization) number.
Press to navigate up and scroll up, and to increase settings Press to navigate down and scroll down, or decrease settings Shift cursor to left, delete entered numbers or character IPF-2600 User’s Manual/ 使 用 手 冊 使 用 手 冊...
Page 15
VOL-: Reduce handset/speakerphone volume when phone is ACTIVE VOL+: Increase handset/speakerphone volume when phone is ACTIVE switch to Speakerphone mode. IPF-2600 User’s Manual/ 使 用 手 冊 使 用 手 冊 使 用 手 冊 使 用 手 冊 or Hook.
Page 16
LINE. User will also automatically put the current line on “HOLD” by pressing another available LINE for making or receiving other phone calls. IPF-2600 User’s Manual/ Orange LED; will flash for incoming calls and lights up when 使...
Pick up handset or Press “Speaker” button, Press “0-9” followed by “#” to call the preset calling party number. Note: M1-M4 Support PSTN Speed Dial if No PSTN Active/Hold (Default PSTN). “0-9” only Support IP/SIP Speed Dial. IPF-2600 User’s Manual/ MUTE will mute the conversation, 使 用 手 冊 使 用 手 冊...
Ⅳ Ⅳ Ⅳ Ⅳ . Configuration Settings The IPF-2600 IP phone supports multiple configuration settings. In this section, it mainly explains configuring using the phone keypad, and through the website. When the phone is connected properly, press the “Menu” button to enter the Menu mode to make changes on settings. Press the “Menu” button again to exit from the Menu.
: User name E nter PPPoE user ID : Password E nter PPPoE password : IPF-2600 User’s Manual/ s etting is done through the ( ) 使 用 手 冊 使 用 手 冊 使 用 手 冊 使 用 手 冊...
: System authentication setting Display software version IP phone main control Restart the IP phone IPF-2600 User’s Manual/ F TP server login name : F TP server password r estore default setting 使 用 手 冊...
Page 23
Enter the name for the phone entries Enter the phone number. Add “-“ Symbol for an IP phone number to differentiate between the PSTN number. IPF-2600 User’s Manual/ 使 用 手 冊 使 用 手 冊 使 用 手 冊...
Press to confirm to add phone entries. Maximum speed dial entries are 10. Add Phone Clear the data that set just now Reset IPF-2600 User’s Manual/ 使 用 手 冊 使 用 手 冊 使 用 手 冊 使 用 手 冊...
Default Value is 5S.After long wait automatically dial . Submit Changes in the implementation of storage set. Reset Clear the data which have set. IPF-2600 User’s Manual/ 使 用 手 冊 使 用 手 冊 使 用 手 冊 使 用 手 冊...
Set the name and phone number for No Answer Forward calls. No Answer Fwd No Set the ring time for call forwarding. Time Out Reset call forwarding setting Reset IPF-2600 User’s Manual/ IP(receiving IP(SIP) mode) IP(receiving IP(SIP) mode) 使 用 手 冊 使 用 手 冊 使 用 手 冊...
Block period setting – set the time to block IP calls. Enter start time at the “From” DND Period column, and enter end time at the “To” column. IPF-2600 User’s Manual/ 使 用 手 冊 使 用 手 冊 使 用 手 冊...
Adjust handset gain (suggested not to exceed 13) Handset Gain Adjust Speaker Gain. Speaker Gain Adjust the gain for using PSTN lines. PSTN-In Gain IPF-2600 User’s Manual/ 使 用 手 冊 使 用 手 冊 使 用 手 冊 使 用 手 冊...
Input Local IP, Subnet Mask, Gateway IP, DNS after Fixed IP is selected. DHCP server received IP information after DHCP Client is selected. (Suitable for Cable Modem users) IPF-2600 User’s Manual/ 使 用 手 冊 使 用 手 冊 使 用 手 冊...
Default is 136, Virtual LAN Server setting, VLAN Identifier (Virtual LAN ID. Name VLAN ID or VID). User Priority Default is 0, user priority Setting, user priority(0-7). IPF-2600 User’s Manual/ 使 用 手 冊 使 用 手 冊 使 用 手 冊...
Secondary Server. Input the Secondary Time Server Address. Secondary Server: Time Zone. Input the local time. Time Zone Sync. Time. Input the Sync. Time. Sync. Time IPF-2600 User’s Manual/ 使 用 手 冊 使 用 手 冊 使 用 手 冊 使 用 手 冊...
Reset Default Settings DMA Setting Item Description DMZ. DMZ is to set a domain server outside of the firewall, it allows to designate IPF-2600 User’s Manual/ 使 用 手 冊 使 用 手 冊 使 用 手 冊 使 用 手 冊...
Dial-out number is the first number registered (the first pick is the number with “On” option). IF the first accounts could not be registered automatically Switch to register on the next IPF-2600 User’s Manual/ account. Any of 3 registered numbers can 使...
RTP port number is the number for Vocal sending and receiving setting. It can be RTP Port arranged from 1024 to 65533 but it must be even numbers. IPF-2600 User’s Manual/ 使 用 手 冊 使 用 手 冊 使 用 手 冊...
Reset Default Settings For the settings of G726 Codec and RFC 2833, we suggest setting them up with default value unless the Registration platform has other requirements. IPF-2600 User’s Manual/ 使 用 手 冊 使 用 手 冊 使 用 手 冊...
Page 39
DTMF signals Using Inband DTMF transmission DTMF signals Using SIP Info Changes in the implementation of storage set. Reset Default Settings IPF-2600 User’s Manual/ 使 用 手 冊 使 用 手 冊 使 用 手 冊 使 用 手 冊...
Set up the size of Voice QoS. Higher number is larger than lower number. Voice QoS Set up the size of SIP QoS. Sip QoS SIP Expire Time SIP Expire Time IPF-2600 User’s Manual/ 使 用 手 冊 使 用 手 冊 使 用 手 冊 使 用 手 冊...
Inspection Firmware version of the product model data Next update time Next checking or Updating date and time Submit Submit Reset Reset Default Settings IPF-2600 User’s Manual/ 使 用 手 冊 使 用 手 冊 使 用 手 冊 使 用 手 冊...
Page 44
Check if the signals sent by the host are reporting back. We suggest using default values. Item Description responding to the message of ping. responding to the message of ping IPF-2600 User’s Manual/ 使 用 手 冊 使 用 手 冊 使 用 手 冊 使 用 手 冊...
Username. Set up a New Username for Registration. New username Set up a New Password New password Confirm Password Confirmed password IPF-2600 User’s Manual/ 使 用 手 冊 使 用 手 冊 使 用 手 冊 使 用 手 冊...
1. How do I know that IPS-2600 Registration is complete? A: If IPF-2600 is registered successfully; the Registration number will be displayed on LCD. If “No Service” is displayed on LCD that means the Registration is not complete. System requires 2 minutes to complete Registration for IPF-2600.
Page 48
002, the actual number is 2: When input numbers include 003, as long as the numbers begin with 003, 006 will automatically instead of [006+xxx] IPF-2600 User’s Manual/ 使 用 手 冊 使 用 手 冊 使 用 手 冊...
Page 49
5: Press “3” key and then press “*” key. 6: When the IPF2600 go to idle status, LCD will display number at C platform, user could make calls at C platform. IPF-2600 User’s Manual/ 使 用 手 冊 使 用 手 冊...
2 Add Entry Phone Book 3 Speed Dial ,LCD ,LCD ,LCD M1~M4 PSTN MENU MENU MENU Name IPF-2600 User’s Manual/ M1~M4 MENU Number Name Name Number PSTN Name Number 使 用 手 冊 使 用 手 冊 使 用 手 冊...
話 機 資 訊 Model Name Firmware Version Firmware Codec Version Codec 5.2.1 Phone Book PHONE Book Delete Selected Delete All Position Name IPF-2600 User’s Manual/ 使 用 手 冊 使 用 手 冊 使 用 手 冊 使 用 手 冊...
5.2.3 Auto Answer Auto Answer Auto Answer Auto Answer Counter PIN Code Enabled PIN Code 5.2.4 Dial plan setting No Answer Fwd Time Out IPF-2600 User’s Manual/ 0 8 , call forward...
AF XXXX AF Busy Forward PSTN No Answer Forward All Fwd No. Busy Fwd No No Answer Fwd No No Answer Fwd Time No ( Yes ( rule rule 5( ) All Forward All Forward XXXX IPF-2600 User’s Manual/ ,FWD ,LCD PSTN...
Ringer Type Submit Reset 5.2.10 Flash Time Setting Flash Time Setting Flash Time Submit Reset 5.3.1 Status Status Type Mask Gateway DNS Server 1 DNS Server 2 Flash( IPF-2600 User’s Manual/...
NAT: Ip Type Mask Gateway DNS Server 1 DNS Server 2 PPPoE Setting User Name Password Submit Reset Fixed I Local IP Subnet Mask Gateway IP DNS DHCP Clien DHCP server PPPo ADSL pppoe ADSL pppoe ADSL IPF-2600 User’s Manual/...
DDNS Setting DDNS DDNS Host Name DDNS User Name Password: E-mail Address DDNS Server DDNS DDNS DDNS Server List DDNS Type Wild card Back MX Off Line Submit Reset DDNS Wild Card Back MX DDNS Off Line IPF-2600 User’s Manual/...
Submit Reset Off( On ( VLAN Server VLAN ID VID) (user priority), Off( On ( VLAN Server VLAN ID VID) IPF-2600 User’s Manual/ VALN Packets (Virtual LAN ID, Canonical Format Indicator (CFI) NCFI (Canonical Format) VALN Packets (Virtual LAN ID,...
5.3.5 SNTP Setting SNTP Setting SNTP Primary Server Secondary Server: Time Zone Sync. Time Submit Reset 5.4.1 LAN Setting IPF-2600 User’s Manual/ ,off...
TFTP Server TFTP Server HTTP Server HTTP Server HTTP Path FTP Server FTP Server FTP Username FTP Server FTP Password FTP Server Submit Reset Off( : /123/ (User name) (Password) IPF-2600 User’s Manual/ TFTP,FTP HTTP Domain Name Domain Name Domain Name...
Off( Scheduling( Scheduling( ): Power on + Scheduling, AM 00:00 – 05:59 AM 00:00 – 05:59, AM 06:00 – 11:59, AM 12:00 – 17:59, Notify only ( ),Automatic( Find new S/W”, Scheduling IPF-2600 User’s Manual/ TFTP,FTP HTTP Notify only( Phone:...
Need help?
Do you have a question about the IPF-2600 and is the answer not in the manual?
Questions and answers