Section 7: System & Gps Setup Options; Alarms - Lowrance Fish Finder Installation And Operation Instructions Manual

Section 7:
System & GPS Setup Options

Alarms

You unit has three alarms: Arrival Alarm, Off Course Alarm and An-
chor Alarm. You can turn the alarms off and on and change their dis-
tance settings.
You can set an arrival alarm to flash a warning message and sound a
tone when you cross a preset distance from a waypoint. If, for example,
you have the arrival alarm set to 0.1 mile, then the alarm will flash a
message when you come within 0.1 mile of the recalled waypoint.
The off course alarm warns you when your track drifts too far to the
right or left of the course line to the waypoint. If, for example, the
alarm is set to 0.1 mile, then the alarm flashes a message if you drift
0.1 of a mile or more to the right or left of the line to the waypoint.
The anchor alarm is triggered when you drift outside of a preset radius.
If, for example, you are anchored and your boat moves more than 0.1
mile, the alarm will flash a message and sound a tone.
Alarms command, left; Alarm menu, right.
To change alarm settings:
1. Press menu| |↓ to | | .
MENU A ENT ENT
LARMS
2. Scroll ↓ or ↑ to select the desired category, then press to check or
ENT
clear the Enabled box. This turns the alarm on (checked) or off (un-
checked.)
3. To change distance settings, scroll ↓ or ↑ to select the desired cate-
gory, then press →| to activate the distance dialog box. Press ↑ or ↓
ENT
to change the first character, then press → to the next character and
repeat until the name is correct.
81