Lowrance Fish Finder Installation And Operation Instructions Manual page 70

Sequence for saving a trail and beginning a new one. At left, My Trails
command. Center, the Trails Menu. The arrow to the right of Trail 3
indicates the trail is "active," and the check to the left indicates the
trail is visible on the plotter display. The right figure shows the Edit
Trail menu, with the Active command selected.
New trail, named "Trail 3," is created when Trail 2 is made inactive.
Any new travel will be recorded in this trail, which is active and visi-
ble. Trails do not need to be visible in order to be active.
To save a Trail:
1. Press
MENU
2. Press ↓ to the Active Trail Name|
3. Press ↓ to
A
4. To return to the previous page, press
You can save and recall up to 10 different plot trails.
Tip:
Another quick way to stop recording one trail and begin a new one
is to use the New Trail command: Press
|
T ENT
RAILS
Visible
symbol
| |↓ to
MENU M
| . This unchecks the Active option.
ENT
CTIVE
| .
ENT
Active
symbol
| .
T ENT
Y RAILS
.
ENT
EXIT
68
repeatedly.
|
MENU MENU
|↓ to
M
Y