Pop-Up Help; Position Pinning - Lowrance Fish Finder Installation And Operation Instructions Manual

Tip:
If you wish, you can change the displayed data font size when you
select a data type:
1. From the Plotter or Sonar page, press
|↓ to
MENU
2. Press ↓ or ↑ to select Data Type|press → or
← to select Data Size|
The data will be shown in the new font size. To
return to the previous page, press

Pop-up Help

Help is available for virtually all of the menu labels on this unit. By
highlighting a menu item and leaving it highlighted for a few seconds,
a pop-up message appears that describes the function of the menu item.
This feature is on by default.
System Setup Menu, left, with Pop-up Help command highlighted. At
right, this example shows the Pop-up Help message for the Sensitivity
To turn on Popup Help:
1. Press
MENU
tion highlighted, press
off). After the option is set, press

Position Pinning

When you are standing still or moving at extremely slow speed, a GPS
receiver can have trouble determining the direction you are traveling.
In the past, this resulted in a wandering plot trail that moved around
the plotter, even if you were standing still.
|
O D
VERLAY ATA
ENT
command, located on the Sonar Menu.
| |↓ to
MENU S
ENT
.
ENT
.
EXIT
|↓ to
S
YSTEM ETUP
to check it (turn on) and uncheck it (turn
to return to the page display.
EXIT
89
Overlay Data
| .
EXIT
P H
OPUP ELP
. With the op-