Epson 890 User Manual page 75

button Before you can use either of these
features, you have to configure your hard disk
drive.
The drive is already partitioned to set aside a
25MB area for the saved data (allowing space
for all memory configurations). This area is
invisible to your software, and the amount of
disk space available to you for normal data
storage is reduced
If you need to partition a drive, for example if
you install a new one, copy the utility into the
PM directory; then run the PHDISK utility
program by typing the following commands
at the DOS prompt:
CD\PM
PHDISK/CREATE
The PHDISK program formats the partition on
your hard disk drive. After you run this
program, you can use the Save to Disk and
Instant On functions available on the Power
Management screen. These options take effect
immediately. You might need to run this
utility again if you change the memory size.
6-10 Customizing Your Computer