Using The Detachable Blower For "Blowing - RIDGID WD40800 Owner's Manual

Operation (continued)
Using the Detachable Blower
for "Blowing"
Two suggested methods of using the
blower are:
1. Insert the round end of the blower
wand into the blowing port of the
detachable blower and turn clockwise
to lock.
2. The Wet/Dry Vac may also be used for
blowing using the seven-foot hose
supplied with the Wet/Dry Vac. Install
the push button end of the Vac hose in
the blowing port of the detachable
blower. For added control, an
extension wand and/or car nozzle can
be added to the opposite end of the
hose. The unit is ready for blowing
applications.
Turn the blower "ON" by sliding the switch
in the handle of the blower to the "I"
position.
-or-
11
Goggles
Dusk Mask
"ON"
"OFF"
Switch
Blowing
Port
TURN CLOCKWISE
TO LOCK
Blower
Wand
"ON"
"OFF"
Switch
Car
Nozzle
Hose