Sync Data From Sensors To Web Service Via Dock; Syncing Information; Unsynced Data; Analyze Data In Team Pro App - Polar Electro Pro Team User Manual

SYNC DATA FROM SENSORS TO WEB SERVICE
VIA DOCK
After ending a training session, it's time to sync the data from the sensors to the Polar Pro Team dock and
then to the Team Pro web service for further analysis.
1. Collect the Polar Pro sensors and straps from the players.
2. Place the Polar Pro sensors into the dock.
3. Place the iPad into the dock.
4. Press SYNC in the SENSORS & DOCK view on the app.
5. A green check mark will appear on the sensors on the screen when the sync is complete.

SYNCING INFORMATION

A maximum of 20 sensors can be synced at a time. If you have more than 20 sensors, they can be
l
synced successively.
Your iPad needs to have an internet connection for the data to be transferred to the Polar Team Pro
l
web service.
Synced data is stored in a secure cloud server.
l

UNSYNCED DATA

If is displayed next to the session, the data is not synced with the dock. Tap
l
pop up, and tap Sync now.
If the data from all sensors is not synced (one or more sensors are not synced), Partly synced is
l
displayed in the pop up. In this case place the sensors that have not been synced in the dock and sync.
If is displayed next to the session, the data is not synced with the web service. Place your
l
iPad into the dock. Tap

ANALYZE DATA IN TEAM PRO APP

The Polar Team Pro app provides instant session summary right after training, an advanced analysis view for
in-depth sample data comparison and a heat map view for location analysis. The Polar Team Pro app training
session view has three main views: SUMMARY, ANALYSIS and MAP.

EDIT SESSION START TIME OR END TIME

Choose Edit in the upper right corner to edit the start or end time of a session.
to open a pop up, and tap Sync now.
26
to open a