Zoom The Compare View; Trim; Trim Session; Phases - Polar Electro Pro Team User Manual

ZOOM THE COMPARE VIEW

1. On the graph, press and hold the right mouse button at the point you want to start the phase, and drag
until you reach the point you want to end the phase, and then release the mouse button.
2. To reset the zoom and return to the default view, click

TRIM

Edit the start and end time of a training session. You can trim a training session from the start, end or both.

TRIM SESSION

1. Choose a training session.
2. Click
on the right
3. Choose TRIM SESSION, and use the slider to trim the session start time or end time. Or type the start
and end time in the boxes.
4. Click SAVE.
Please note that after trimming a session it cannot be undone.

PHASES

Add phases to your training session. After adding a phase you can choose to view performance data from that
phase only. Phases can only be added in the web service, and they can only be added after a training session
is finished. Phases cannot be added during a training session.

ADD PHASE

1. Choose a training session in the
2. Click
on the right.
3. Click ADD PHASE, press and hold the right mouse button and at the point you want to start the
phase, and drag until you reach the point you want to end the phase, and then release the mouse
button. Or type the phase start and end time in the boxes.
4. Name the phase.
5. Click SAVE PHASE.
Activities view.
32
.