803
152
•
To remove the push/turn control module (Espresso 802, Lungo 803), press down
latch (A) of holder (152) with a screwdriver.
•
Then insert thumb or finger tip in front opening and press push/turn control module
backwards with caution until it is released from latch (A).
•
Remove screwdriver and use it to open both latches (B) of holder (152) one after the
other.
•
Carefully remove push/turn control module out of holder (152).
Assembly checkpoints
•
Position knob in position 1 before reassembly.
•
Do not exchange Espresso and Lungo push/turn buttons (Espresso 812, Lungo
813) by accident.
•
Verify that the light guide (153) is correctly placed and is visible from the outside.
A
B
Maestria / Gran Maestria service manual
R E P A I R S
802
B
Risk to break the
light guide when
removing the push/
turn control module.
61