Table of Contents
Advertisement
Both the D850 and the D1650 can be configured as the main amplifier for an
audio distribution system or home theater system.
When used with an audio distribution preamp, each zone can independently
drive one of several different sources by using each zone's individual line audio
inputs, or a pair of zones can be Bridge to create a higher powered zone.
When the D1650 is used as a home theater amplifier, up to a 7.1 system can
be supported. We recommend bridging the outputs for left, center and right
and using stereo mode for both pairs of surround speakers. The remaining
zone can be used for powering an additional area such as an outdoor zone.
Connections for audio distribution preamp outputs
Russound D850, D1650 Installation Manual
TYPICAL SYSTEM CONFIGURATION
Note: For using signal sensing see page 9
7
Hide quick links:
Advertisement
Table of Contents
