Minimum Mantel And Enclosure Clearances - Napoleon Vittoria GD19N Installation And Operation Instructions Manual

MINIMUM MANTEL AND ENCLOSURE CLEARANCES

Mantel clearance can vary according to the mantel depth.
Use the graph to help evaluate the clearance needed.
Combustible materials must be installed fl ush with the front
of the fi replace but must not cover any of the black face-area
of the fi replace. Non-combustible material (brick, stone or
ceramic tile) may protrude past the face of the fi replace.
FIGURES 41a&b
TOP OF
FIREPLACE
M
A
N
T
E
L
H
E
I
G
H
T
MANTEL DEPTH
FIGURE 42
20"
1"
53"
33 / "
1
8
The fi replace requires a minimum enclosure height of 53" for a top vent, and 39" for a rear vent. For
temperature requirements, the enclosure space around and above the fi replace must be left unostructed.
See fi gures 42 and 43.
8" MANTEL
6"
4"
8"
2"
6"
4"
2"
2"
6"
1"
1"
MINIMUM
FIGURE 43
6"
39"
33 / "
1
8
NOTE: Do not build into this area -
it must be left clear to provide
adequate clearance for the vent.
1 / "
1
In this 14" wide area centred along
2
MAXIMUM
the front of the fireplace, no
14"
MINIMUM
1 / "
1
2
*FINISHING
MAXIMUM
MATERIAL
OPENING
HEIGHT
MUST BE
34 1 / "
8
*FINISHING MATERIAL
OPENING WIDTH
/ "
MUST BE 20 1
4
* Dimensions must be maintained for the facing kit to cover the
opening.
2"
1"
1"
MINIMUM
FIGURE 44
combustibles are allowed.
1 / " *
4
*KEEP
FACING
MATERIAL
/ " FROM
1
4
SIDE OF
UNIT.
13 1 / "
4
W415-0612 / A / 11.05.07
21