Installation
Installation Warnings:
!
Failure to follow all of the requirements may result in property damage, bodily injury, or even
death.
!
This heater must be installed by a qualified installer who has gone through a training program
for the installation of direct vent gas appliances.
!
This appliance must be installed in accordance with all local codes, if any; if not, in U.S.A.
follow ANSI Z223.1 and NFPA 54(88), in Canada follow B-149.
!
In Manufactured or Mobile Homes must conform with: In USA, Manufactured Home
Construction and Safety Standard, Title 24 CFR, Part 3280; In Canada, CSA Z240.4 and Gas-
Equipped Recreational Vehicles and Mobile Housing. This appliance may be installed in
Manufactured Housing only after the home is site located.
!
This stove is designed to operate on natural gas or propane (LP).
!
All exhaust gases must be vented outside the structure of the living-area. Combustion air is
drawn from outside the living-area structure.
!
Notify your insurance company before hooking up this stove.
!
The requirements listed below are divided into sections. All requirements must be met
simultaneously. The order of installation is not rigid – the qualified installer should follow the
procedure best suited for the installation.
Packing List
•
Propane Conversion Kit
•
Log Set
•
Touch-Up Paint
•
4 Screws & Clips for stone inserts
•
Cover Plate with Knob (for the Aroma-Therapy option)
Installation Overview
See "Vent
Requirements"
See "Gas Line
Installation"
© Travis Industries
(for qualified installers only)
See "Floor
Protection
Requirements"
4090717
Additional Items Required
•
Vent (see "Venting Requirements" for details)
•
Gas Line Equipment (shutoff valve, pipe, etc.)
Additional Accessories Required
•
Enameled Units are shipped without the top and side
inserts. These inserts must be installed prior to operation.
See
"Clearances"
7
100-01225_000