Lopi Burner Owner's Manual page 30

Finalizing the Installation
30
Front Ember Chunk Placement
This log set includes a left, center, and right-side ember chunk (see photo below).
Place the ember chunks as shown in the photos below. Make sure the ember chunks do not cover
any burner holes.
Left Side Ember Chunk
Rockwool Installation
The included rock wool is placed on top of the burner to enhance the glow from the burner. The rock
wool works best when it is applied in a very thin, porous layer. The best method for applying the
rock wool is to brush it on to the burner. Compress a clump of rockwool between your thumb and
forefinger. Use a stiff brush to apply a thin layer of rockwool fibers onto the burner. Do not use the
entire bag of rockwool. Use only a small amount and save the remainder. Over-use of rockwool will
diminish the glow and may cause sooting or other adverse conditions.
© Travis Industries
Left Ember Chunk
Right Side Ember Chunk
Center Ember Chunk
4090717
(for qualified installers only)
Right Ember Chunk
Center Ember Chunk
100-01225_000