Features; Installation Options; Heating Specifications; Dimensions - Lopi Burner Owner's Manual

6

Features:

- Ember Fyre™ Burner for "Wood Fire" Look
- Works During Power Outages (battery backup system)
- High Efficiency
- Optional Thermostat or Remote Control
- Optional Blower for Quicker Heat Distribution
- Convenient Operating Controls
- Variable-Rate Heat Output
- Accent Light

Heating Specifications:

Approximate Heating Capacity (in square feet)* ........... 500 - 1,500 with Blower, 500 to 1,200 Without
Maximum Input ...............................................................................................31,000
• Heating capacity will vary depending on the home's floor plan, degree of insulation, and the outside temperature.
Dimensions & Weight:
19"
483mm
16-1/8"
410mm
Weight: 215 Lbs.
Electrical Specifications (for optional blower)
Electrical Rating ............................................................. 115 Volts, 1.5 Amps, 60 Hz (180 watt)
Fuel:
This heater is shipped in natural gas (NG) configuration but may be converted to propane (LP) using
the included LP conversion kit. The sticker on top of the gas control valve will verify the correct fuel.
© Travis Industries
Specifications
4-7/8"
124mm
97.6kg
4090717

Installation Options:

- Freestanding Stove
- Horizontal or Vertical Vent
- Residential or Mobile Home
- Straight or Corner Placement
- Bedroom Approved
26-3/4"
The flue collar protrudes 7/8"
679mm
(0.875mm) above the stove
top
NOTE:
Measure side, corner,
and back clearances
from the stove top.
28-1/8"
714mm
100-01225_000