Lopi Burner Owner's Manual page 53

Optional Equipment
18 Attach the accent light power lead to the fan controller in the "AUX OUT" receptacle (see Figure 28).
NOTE: If using the optional fan, you will want to disconnect its power lead and connect it to the extra
power lead included with this kit, then connect it to the "FAN" receptacle on the fan controller.
See the blower installation instructions for details.
19 Slide the receiver through the control panel and attach the "RECEIVER" connector to the receiver
(see Figure 29). Attach the control panel to the stove using the four screws removed earlier (see
Figure 30).
© Travis Industries
(for qualified installers only)
Figure 29
4090717
53
Figure 28
Figure 30
100-01225_000