Preset Utilization; Using Osd For The Speed Dome Camera - Samsung SVR-1650 User Manual

4.10.3 Preset utilization

Select a desired channel from channel 1~16 and select the entire screen mode.
Press PTZ to select the PTZ mode (PTZ is displayed in the upper right corner of the screen.)
Use the mouse on PRESET, located below PTZ on the screen, to setup the value (1~255).
If the desired button between Channel 1 ~ Channel 16 is pressed, the cursor is moved to the
button and the ENTER key located on the front of DVR is pressed, the camera operates with
preset values setup in advance.

4.10.4 Using OSD for the Speed Dome Camera

After pressing the PTZ button from the single screen, if either the ENTER key in the front
of the DVR or the mouse button is pressed after moving the cursor to ......, OSD for the
speed dome camera and the following message will be displayed: 'PTZ OSD'.
OSD cursor for the speed dome camera may be moved up/down and left/right by using
▲▼ ◀▶
Changes in OSD for the speed dome camera may be setup or cancelled by using ENTER and
ESC keys in the front of the DVR.
OSD function for the speed dome camera can be terminated by pressing the PTZ button in
the front of the DVR.
42
keys in the front of the DVR.
M
o