Zoom/Focus Control; Load Preset Application; Save Preset Application; Auxiliary On Application - Samsung SVR-1660 User Manual

User Manual

4.8.2 Zoom/Focus Control

This menu used to utilize Zoom & Focus functions from real time monitoring mode.
Select Zoom/Focus from PTZ mode.
-
It utilizes for Zoom & Focus functions through direction key at front part or mouse wheel.
-

4.8.3 Load Preset application

This menu is used when it moves to Preset location from real time monitoring mode.
Select Preset number using up/down button or mouse wheel.
-
If Preset is set, select Load and press Enter button or click mouse.
-
-

4.8.4 Save Preset application

This menu used when it sets Preset location from real time monitoring mode.
Control camera location using 'Pan/Tilt' and 'Zoom/Focus' menu.
-
Select Preset number using up/down button or mouse wheel.
-
If Preset is set, select Save and press Enter button or mouse click.
-

4.8.5 Auxiliary On application

This menu used when it uses special function of PTZ device from real time monitoring mode.
Set Aux number using up/down direction key or mouse wheel.
-
Select On, and press Enter button or mouse click
-
(Total 16 Aux functions are available.)
-

4.8.6 Auxiliary Off application

Set Aux number using up/down direction key or mouse wheel.
-
Select Off, and press Enter button or mouse click
-
- This menu used when it stops working special function of PTZ device.

4.9 Screen Lock Control

This function is to prevent control or setup from any user who has no right.
To use this function, it needs to set "User Password" first. (It needs to set Admin Password to set
User Password)
If it press [ESC] button more than 3 seconds, "Screen Locked" message is loaded at lower
screen and Lock mode works. When "User Password" sets to Off, "Enable user password first"
message is loaded on screen.
In case of Lock mode, any button does not work. And it must be released to operate any
function button.
Whatever any button is pressed at Lock mode, it loads window asking User Password. And
28