Step 9
® Parts Needed For •
Wall Panels
•
6515 Wall Panel (8)
$1_2
Each wall panel has a crimped rib on
one side, The crimped rib should go
under the rib of the panel that follows
it.
1 Locate all of the wall panels
and
set each one alongside
the building.
2 Fasten the wall panels at the top
Crimped Rib __
Underneath
6515
Detail Showing
Center of Panel
Screwed to
Wall Channel
and bottom with screws.
3 Fasten the center of each panel to
the wall channel with screws.
4 Fasten overlapping
ribs as before.
Panels rest ol
frame as shown
Bolt and nut
does not go
thru wall
channel at
overlap
Use bolts and nuts
thru wall
angle
overlap at the top
of panel at rear,
22