Step 1 - Place & Power The Transmitter - TV Ears 5.0 Analog User Manual

Step 1 - Place & Power the Transmitter
This step explains where to place the transmitter for the best
performance as well as how to power the transmitter.
The infrared diodes on the transmitter must be in direct line-
of-sight with the headset when using the system for best
performance. There cannot be anything blocking the direct signal,
otherwise there will be no audio received and no sound heard.
1
Place the transmitter on a flat surface that is 3 to 5 feet
above the ground. Be sure it is pointed to the seating area
where the headset will be used.
2
Plug the AC adapter into a standard electrical outlet or
surge protector.
3
Plug the end of the AC adapter into the port labeled "12V"
on the back of the transmitter. The correct port has a blue
border around it.
8
For assistance, call us at 866-611-9934
Power Port
12v