Step 2 | Power And Place The Tv Ears Transmitter - TV Ears 2.3 System User Manual

Installation Tips:
• Ports on the front of TVs are usually audio in ports
and will not send sound to your TV Ears.
• Fixed/Variable audio setting: See the
Troubleshooting Guide on page 15.
• TV Ears does not work with digital audio out ports
without the TV Ears DAC (Digital Analog Converter).
For information on the DAC see page 12.
The transmitter lights must be in direct line of sight with
the headset.
1. Place the transmitter on a flat surface 3-5 feet off
the ground.
2. Point the front of the transmitter towards the
seating area where the headset will be used. Plug
the end of the AC adapter
labeled '12V' on the back of the transmitter.
3. Plug the AC adapter into a standard electrical
outlet or surge protector.
Note: The transmitter must remain plugged-in to charge
the headset and transmit the infrared signal.
Instructions
Power and Place the
TV Ears Transmitter
into the port
10
Installation
Step
2
4