Loewe R 37 Full-HD+ 100, R 37 HD+ 100 Operating Instructions Manual page 50

Operating additional equipment
If you want to set up or change a speaker system:
3 4 S elect Configuration/modification,
OK call selection.
Sound components wizard
Please specify here whether you want to completely reconfigure a speakers
system or whether you want to limit the configuration to changing the
speaker connections, the speaker distances from the listening position or
the individual speaker levels in relation to each other.
Sound components
Configuration/modification of speaker system
Complete
Connections only
Distances only
Levels only
Proceed
OK
6  S elect Complete,
OK continue to connect and set the front speakers.
Sound components wizard
Please specify here whether you want to connect
external front speakers. In this case, their lower
limit frequency must be entered in Hz (see
instruction manual and technical data of the
speakers).
Sound components
Connect front speakers
TV speakers External speakers
40 Hz
Proceed
OK
34 S elect External speakers,
6 go to the menu line below and
34 s et the lower limit frequency of the front speakers
in 10 Hz steps.
Sound components wizard
Please specify here whether you want to connect
external front speakers. In this case, their lower
limit frequency must be entered in Hz (see
instruction manual and technical data of the
speakers).
Sound components
Connect front speakers
External speakers
70 Hz
Proceed
OK
- 50
OK
END
40Hz
40Hz
TV speakers
END
70Hz 70Hz
END
➠ Select the start value of the frequency response of the
speakers for the right setting (e.g. 50Hz for the
specification "Frequency response 50-20.000Hz"). See
the technical data of the speakers for the value.
➠ You can replace the external front speakers by the TV
speakers if necessary. In this case, select TV speakers.
Then transmit the sound of the front speakers.
OK Continue to connect and set the surround speakers.
34 Select yes for external speakers.
➠ If no surround speakers are connected, these can be
simulated using the front and centre speakers.
6 Go to the menu line below and
3 4 s et the lower limit frequency of the surround
speakers in 10 Hz steps.
➠ Select the start value of the frequency response of the
speakers for the right setting.
OK Continue to connect and set the centre speaker.
3 4 Select whether the TV speakers or an External
speaker is to reproduce the centre sound or no if
no centre speaker is connected.
➠ If no centre speaker is connected, the front speakers
also transmit the centre sound parts additionally.
6 F or External speakers or TV speakers go to the
menu line below and
3 4 s et the lower limit frequency of the centre speaker
in 10 Hz steps.
➠ Select the start value of the frequency response of the
speakers for the right setting.
OK Continue to connect the Subwoofer.
34 yes is the selection for subwoofer.
➠ If no subwoofer is connected, the front speakers
additionally transmit the sound parts intended for the
subwoofer as far as possible.
continued on the next page
Ž