Or For A Loewe Dvd Player - Loewe TV 32 HD/DR+ Operating Instructions Manual

Operating additional equipment
Operating other Loewe equipment with the
RC3 remote control
You can operate various Loewe equipment with
this remote control. Further information can be
found on the next page.
TV
DVD STB
Select VCR, DVD or a Set Top
VCR
Box with the switch.
Default options are Loewe video recorders,
Loewe DVD recorders and the d-box common in
Germany for STBs (Set Top Box). For operation of
a Loewe DVD player the remote control must be
switched over (see next column).
Use the drive buttons in TV- and STB
position for VCR, DVD or Digital Recorder
You can switch over the six drive buttons both
for TV and STB for operating a VCR or DVD
player/recorder. Operation of the built-in Digital
Recorder Plus is specified ex-factory.
TV
DVD STB
First turn the switch to the main
VCR
function TV or STB.
Press the END and
tons at the same time (5 secs).
EPG
The display at the top left of the
remote control flashes twice.
wxyz
Enter the numbers 988 one after
the other. The display again
tuv
flashes twice.
tuv
TV
Now turn the switch to the
DVD STB
required function for the drive
VCR
buttons. DVD, VCR or TV if the
Digital Recorder is to be used.
Press the # PIP button to com-
PIP
plete the setting. The display
flashes twice.
BAQ2550H_31310_021_4_GB
Switching over the remote control for
operating equipment of other
manufacturers or for a Loewe DVD player
You can switch over the remote control for
VCRs, DVD players and Set Top Boxes if the
infrared code of the equipment type is listed in
the code list or is in the code memory of the
RC3.
Switching over is done on the one hand by
entering a four-digit code and on the other hand
the remote control suggests codes which you
can test on the equipment.
If you cannot find the equipment in the code
list, try a suggestion from the remote control.
Even if the manufacturer of the equipment is
included in the code list, it is possible that it
cannot be operated. Not all functions on the
RC3 are available for this equipment.
Switching over the remote control – with
code input – e.g. to the Loewe DVD player
Look for the code number of your equipment in
the code list. The list is sorted according to
equipment type – DVD, VCR, STB – and alpha-
betically according to manufacturer. You will
find one or more code numbers next to the
EPG but-
*
manufacturer name.
TV
DVD STB
VCR
EPG
AV
jkl
def
wxyz
21
Using the switch select whether
you want to switch over to a
VCR, DVD player or a Set Top
Box.
Press the END and EPG
*
buttons at the same time (5
secs). The display at the top left
of the remote control flashes
twice.
Enter the four numbers from
the code list one after the other
(0539 for Loewe DVD player).
The display flashes once after
each number is entered. Twice
after the last number.
If the number was incorrect, the
display flashes for longer. The
code number has not been
accepted.
22.07.2004, 10:15 Uhr
Once the code has been accepted with two
flashes, you can test the functionality of the device
you have just programmed.
If the device cannot be operated or is difficult to
operate, repeat the code input with the next code
from the list. If no other codes are specified for
this manufacturer, try a code suggested by the
remote control.
Switching over the remote control – with the
suggestions by the remote control
Switch on the device to which you want to set the
remote control. Standby is not sufficient!
Using the switch select whether
TV
DVD STB
you want to switch over to a VCR,
VCR
DVD player or a Set Top Box.
*
Press the END and
tons at the same time (5 secs).
EPG
The display at the top left of the
remote control flashes twice.
Enter the numbers 991 one after
wxyz
the other. The display flashes once
wxyz
after each number is entered.
Press the # PIP button to select
PIP
the first code.
Hold the remote control pointed towards the
device you want to switch over to. Watch the
device.
(Play) or O (On/
Now press the
Off) button on the remote control.
Wait a moment for the reaction of
the device. If the device does not
react, the code is incorrect.
Press the # PIP button to call the
PIP
next code.
(Play) or O (On/Off)
Press the
button again.
If the device reacts, press the
EPG EPG button to confirm the
*
code.
EPG but-
21