Table of Contents
Advertisement
Operating additional equipment
Video playback
There are several ways to see the picture and
hear the sound of the VCR, DVD player or
camcorder on your TV:
1. Use the Euro-AV sockets on the TV and VCR.
This is the best way to get a good picture and
sound quality. For camcorders and digital
cameras it is best to use the front sockets
AVS.
If you are playing back from a VCR with
Digital Link Plus, the VCR picture is shown on
the current station slot.
If you are playing back from a standard VCR,
DVD player, camcorder or digital camera,
select the AV socket to which the video signal
is connected in the AV selection list
(button 0 AV) or the station table.
Video recorders emit a switching voltage
during playback which the TV set can decode
(can be activated in the connection wizard or
set Settings – AV Settings – Allow switching
voltage to "Yes" in the TV menu). Then the
VCR picture is shown on the current station
slot as in Digital Link Plus VCR's.
2. You can also control logged-in Loewe VCRs
and DVD players with the video menu bar.
See page 18 for more details.
3. Use the antenna connection between the
VCR and the TV. The sound is only transmitted
in mono. Select the first menu item, e.g.
VIDEO, in the AV selection.
20
BAQ2550H_31310_021_4_GB
Calling an AV program in the AV selection list
AV
AV Selection
OK
Now you will see the playback from the con-
nected AV unit.
Calling an AV in the station table
OK
Channel overview: TV
AVS
AV3
AV2
AV1
0 VIDEO
1 ARD
2 ZDF
3 SAT.1
4 RTL
5 VOX
Select and
OK
press OK to proceed
In the numeric sorting you will always find the AV
sockets at the top of the list without station num-
bers.
OK
OK
Now you will see the playback from the connected
AV unit.
20
Call AV selection list
VIDEO AV1 AV2 AV3 AVS
Select AV socket or VIDEO for
VCR station.
Call the station table
Numerical
6 S–RTL
7 N–TV
8 DSF
9 TM3
10 PRO7
11 RTL 2
12 WDR 3
13 BR 3
14 HR
15 MDR 3
0
...
9
Select program:
DR archive
Info
INFO
Change programs
MENU
Menu
Favourite programs
END
End
Change sorting
Mark the AV socket
Call the marked AV socket
22.07.2004, 10:15 Uhr
IR Link
Your TV set has a socket for an IR Link (IR) and
a cable with a jack and IR emitting diode is
also supplied.
This enables you to control most other remotely
controlled devices, such as a concealed d-Box
or a video from a different manufacturer, by
using the TV set's remote control. Insert the
jack of the infrared emitting diode cable into
the IR socket on the back of your TV. The infra-
red emitting diode on the end of this cable
must be placed in front of the concealed device.
For transmission, the TV must be switched on.
You can order a nap strip from your dealer
(Loewe spare parts no. 29337.001) to help lay
the cables. The burl tape is self-adhesive; re-
move the protective film. Affix the burl tape on
the wall of the shelf or cabinet and press the
cable into the burl tape. The burl tape can be
split Into several pieces using a knife. To oper-
ate the concealed video recorder, point the
infrared remote control at the TV set.
Hide quick links:
Advertisement
Table of Contents
