Loewe TV 32 HD/DR+ Operating Instructions Manual page 23

What to do when...
Problem
Various menu items cannot be called (shown in
gray) or the menus for the EPG and teletext
modes of operation cannot be called
Record and Timer are not displayed in the video
menu
"Connections" for example cannot be called in
the video menu (grayed out)
The "Stations" item in the TV menu and the
"Autom. channel search" item in the main infor-
mation cannot be called
Control of the Loewe VCR with the video control
bar and the timer does not work or does not
work properly
General problems with connecting external
devices through an AV input
Picture shifted horizontally
BAQ2550H_31310_021_4_GB
Possible cause
"Simplified control" activated in main information
No VCR or DVD recorder logged in and no digital
recorder installed
a) A timer recording is currently in progress
b) You are recording from the TV set with the
video bar
The child lock is activated. If these menus were
accessible, children could still set the programs.
a) The VCR's Digital Link function is not activated
or not possible
b) Euro-AV cable not connected
c) Video recorder not logged in
a) The device is not logged in in the "Connec-
tions" menu or is connected differently to
shown in the connection diagram
b) The AV norm is set incorrectly
c) The AV signal is set incorrectly
The TV set is in the Southern hemisphere
(e.g. Australia, South Africa)
23
Remedy
Deactivate "Simplified control" in the main infor-
mation. Press the INFO-button, select "Select
control level" and call with OK. Set the "Simplified
control" to "no".
Log in VCR in the TV menu – Connections.
a) Wait until the timer recording has ended or
clear the timer
b) Wait until you stop recording
Deactivate program-related child lock: Switch off
child lock or enter PIN in the TV menu – Settings.
a) Activate Digital Link in the VCR
(see operating instructions of the VCR)
b) Connect the Euro-AV cable
c) Log in the VCR
a) Compare the connection diagram with the
actual installation in the "Main information"
under "Connections" and connect as shown
if necessary
b) Set the correct norm
c) Set the correct AV signal
If "Automatic" is set for AV norm or AV signal, this
can lead to wrong detection in the case of non-
standardized signals. In this case the norm and
signal must be set according to the operating
instructions of the external device.
Set the horizontal position:
a) Call the main information with INFO
b) Call Index – Set picture – Horizontal displace-
ment
c) Set horizontal picture position
22.07.2004, 10:15 Uhr
23