Allen + Roth F12-B-031-071A Owner's Manual page 5

ASSEMBLY INSTRUCTIONS
5. Set top frame (J) over top left panel (H) and top
right panel (I). Secure with medium Cross bolts (CC),
spring washers (EE) and flat washers (FF). Tighten
with Phillips screwdriver, but do not overtighten.
Note: When setting the top frame, please be careful
not to put your finger between the top frame and side
panels.
Hardware Used
Medium Cross Bolt
CC
EE Spring Washer
FF Flat Washer
6. Open the preassembled hinges (R) on bottom
side panels (D) and attach doors (K) to assembly
with short screws (II). Tighten securely with Phillips
screwdriver.
Note: Please be careful about your hand while open
the hinge by itself.
Hardware Used
II Short Screw
5
FF
EE
CC
J
H
x 4
x 4
x 4
6
R
D
K
x 8
Lowes.com/allenandroth
8
ASSEMBLY INSTRUCTIONS
7. Insert knob bolts (KK) through backside of doors
(K) and attach knob (JJ). Tighten knob bolt (KK) with
Phillips screwdriver to secure knob (JJ).
Insert adjustable shelves (L) into desired locations in
cabinets of mantel.
I
Hardware Used
D
JJ Knob
KK Knob Bolt
8. From backside of mantel assembly, attach
removable back panels (M) into groove on shelf (G).
II
K
®
7
L
L
L
L
K
K
KK
x 6
x 6
8
M
G
M
M
Lowes.com/allenandroth
9
JJ
JJ
G
®