Important Notes For Single Video Screen System - Dodge 2016 Journey Owner's Manual

Using The Remote Control
1. Push the MODE button on the Remote Control and the
Mode Select Screen will display, unless a video is
playing then only a small banner will appear on the
bottom of the screen.
2. While looking at the video screen, either press Up/
Down/Left/Right on the Remote Control to highlight
the desired audio source or repeatedly push the
MODE button on the remote until the desired audio
source appears on the screen.
Using The Touchscreen Radio Controls
1. Press the "MORE" button on the touchscreen.
2. Press the "Rear Entertainment" button on the touch-
screen to display the Rear Entertainment Controls.
3. If the Rear Entertainment is turned off, press the
"Power" button on the touchscreen.
UNDERSTANDING YOUR INSTRUMENT PANEL 367
4. Press the "1" or "2" button on the touchscreen for the
channel desired and press the "Source" button on the
touchscreen to select the desired mode.

Important Notes For Single Video Screen System

• VES is able to transmit two channels of stereo audio
simultaneously.
• In split screen mode the left side equates to Channel 1
and right side equates to Channel 2.
• If a video source is selected on Channel 1, then
Channel 2 is for audio only.
• When selecting a video source on Channel 1, the video
will display on the screen and the audio will be heard
on Channel 1 in the headphones.
• Audio can be heard through the headphones even
when the Video Screen is closed.
4