Audio Menu - Loewe Centros 1172 Operating Manual

Initial Installation
repeatedly to delete the entry
character by character and then
correct it before you press OK.

Audio Menu

Each DVD disc offers a variety of audio
formats. Set the audio format for the
recorder according to the type of audio system you
are using.
Dolby Digital
PCM: Select this option if the unit is connected
to a digital two channel stereo amplifi er. The DVD
recorder's digital audio outputs emit sound in PCM
2 channel format if you play a DVD-Video disc with
Dolby Digital audio format.
Bitstream: Select "Bitstream" if you have a Dolby
Digital decoder (or amplifi er, a Loewe TV with AC3
or DIS module or another unit with Dolby Digital
decoder) connected to the DIGITAL OUT socket of
the DVD recorder.
Dolby Digital
DTS
MPEG
Sampling Freq.
DRC
Vocal
- 22
32122 DVD Rec_Centros_GB.indb 22 32122 DVD Rec_Centros_GB.indb 22
DTS
Off: If you select "Off" the DTS signal is not emit-
ted from the DIGITAL OUT socket.
Bitstream: Select "Bitstream" if you have a Dolby
Digital decoder (or amplifi er, a Loewe TV with AC3
or DIS module or another unit with Dolby Digital
decoder) connected to the DIGITAL OUT socket of
the DVD recorder.
Dolby Digital
DTS
MPEG
Sampling Freq.
DRC
Vocal
MPEG
PCM: Select this option if the unit is connected
to a digital two channel stereo amplifi er. The DVD
recorder's digital audio outputs emit sound in PCM
PCM
2 channel format if you play a DVD-Video disc with
Bitstream
Dolby Digital audio format.
Bitstream: Select "Bitstream" if you have a Dolby
Digital decoder (or amplifi er, a Loewe TV with AC3
or DIS module or another unit with Dolby Digital
decoder) connected to the DIGITAL OUT socket of
the DVD recorder.
Sampling Frequency
If your receiver or amplifi er is NOT designed for 96
kHz signals, select 48 kHz. If you have made this
selection, the unit automatically converts the 96
kHz signals to 48 kHz signals that the system can
decode. If your receiver or amplifi er is designed for
96 kHz signals, select 96 kHz.
Dolby Digital
DTS
MPEG
Off
Sampling Freq.
Bitstream
DRC
Vocal
Night Mode
Thanks to digital audio technology the DVD format
enables you to hear soundtracks in the most
accurate and realistic way possible. However, you
may wish to limit the dynamics (i.e. the difference
between the loudest and the quietest sounds). In
this way you can play a fi lm with minimum volume
differences. For this purpose switch "Night Mode"
to "On".
Dolby Digital
DTS
MPEG
Sampling Freq.
DRC
Vocal
48KHz
96KHz
OFF
ON
26.04.2005 11:23:22 26.04.2005 11:23:22