Channel Setting - Loewe Centros 1172 Operating Manual

Initial Installation
Preparation
Connect the DVD recorder to the TV set with Digital
Link Plus using a SCART connection. See "Connect-
ing to the Television" on page 14.
Activate Digital Link on the DVD recorder as
described on page 17.
Transfer program list
1. Press .
The menu is displayed.
2. Select the "General" option with
3. Press to call up the second level.
4. Select the "Auto Programming" option with
/ .
5. Press to call up the third level. The country
option is highlighted.
6. Select a country with / and press
The "Start DLP" symbol is highlighted.
Germany
Auto Programming
Program Edit
Start Search
Clock Set
TV Aspect
Display Mode
Start DLP
AV1 to Decoder
PBC
Factory Set
7. Press OK to start transferring the program list
stored in the TV to the DVD recorder.
This may take a few seconds. During the transfer
the DVD recorder display shows "DLP".
Note: (Centros 1172). With Digital Link Plus,
French stations are only broadcast in the correct
standard if you have previously selected "France"
as the country (see Point 6 above).
- 18
32122 DVD Rec_Centros_GB.indb 18 32122 DVD Rec_Centros_GB.indb 18

Channel Setting

You can edit a channel manually (add, delete,
rename, move etc.).
Auto Programming
Program Edit
Clock Set
TV Aspect
Display Mode
AV1 to Decoder
PBC
Factory Set
/ .
1. Press . The menu is displayed.
2. Select the "General" option with
3. The "GENERAL" entry is selected. Press
.
up the second level.
4. Use / to select the "Channel Setting"
option. Then press
The "Change" symbol is highlighted.
5. Press OK. The "Program List" menu is displayed..
PR-01 Decoder NICAM
Select Move
OK
6. Use / to select a PR number, and press
OK. All available options that can be used on
the highlighted program are shown in the bot-
tom left fi eld.
7. Use
to confi rm.
Edit
Program edit: Search, channel entry, fi ne
tuning.
Station Rename: Change name.
Move: Move a program in the progam list.
Delete: Deleting programs from the program
list
Decoder on/off: Divert program via decoder
/ .
("on").
to call
NICAM auto/off: Switch off NICAM reception
("off")
8. Press
to move to the third level.
List" menu.
Edit program
Alongside automatic programming it is also pos-
PR Ch. MFT Station
sible to set and save programs manually.
01 C 12 0 ARD
02 C 23 0 ZDF
1. Use
03 C 7 0 RTL
04 C 27 0 SAT1
List" menu, and press OK. The options are
05 C 17 0 PRO7
displayed on the left side of the "Program List"
06 C 33 0 BBC
07 C 34 0 CNN
menu.
08 C 47 0 ABC
09 C 10 0 TV5
2. Use
10
and press OK. The "Program Edit" menu is
11
displayed.
Page up/down Close
END
PR
3.
previous or next column.
current cursor position.
to select an option, and press OK
/
Program edit
Station Rename
Move
Delete
Decoder on/off
NICAM auto/off
or , to quit the "Program
/ to select a program in the "Program
/ to select the "Program Edit" option
Seek Ch. MFT PAL/SECAM
C 7 0 SECAM
07
/ (left/right): Moves the cursor to the
/ (up/down): Changes the settings of the
26.04.2005 11:23:17 26.04.2005 11:23:17
OK