Page 1
“Touch-Up” Tailor-Quality Steamer Top Innovations, Inc. 400 NW Platte Valley Drive Model SF-410 Riverside, Missouri 64150 www.mitcoproducts.com 1-800-711-6617 Instruction Manual PRINTED IN CHINA Please Read These Instructions Before Use...
Page 3
Here you will find additional information about the many other ______________________________________________________________ exciting Steam Fast products that are available, helpful tips on ______________________________________________________________ ways in which you can utilize your SF-410 “Touch-Up” Tailor- ______________________________________________________________ Quality Steamer, and other useful information to assist you in ______________________________________________________________...
LIMITED WARRANTY IMPORTANT SAFETY INSTRUCTIONS Top Innovations, Inc., will repair or replace, at its option, without charge to ® the consumer any Steam Fast product that fails due to a defect in material or When using electrical appliances, always follow basic safety precautions, workmanship within one year following the initial consumer purchase.
Product Specifications IMPORTANT SAFETY INSTRUCTIONS Unit Weight - Dry 8.5 lb 3.9 kg Unit Weight - Full Water Tank 11.5 lb 5.2 kg Always keep the steam nozzle elevated above the water container. Water Tank Capacity 45 oz 1.3 L Do not lay the hose on the floor.
SF-410 “Touch-Up” Steamer Product Information Removing Mineral Build-up One common problem with steamers is mineral build-up caused by a high min- The following features and accessories come with you steamer. Carefully in- eral content in many municipal water supplies. Mineral residue inside of the in-...
Problem Solving Guide SF-410 “Touch-Up” Steamer Product Information PROBLEM CAUSE SOLUTION • The Pole Top (1) is comprised of the Steam Nozzle Holder (1a) and the Clothes Hanger Hook (1b). The Steam Nozzle Holder provides a safe and Steamer is not plugged Plug into electrical outlet.
Assembly Instructions Quick Storage 1. Turn the Lighted On/Off Switch to “Off.” Assembling and Mounting the Telescopic Pole 2. Unplug the Power Cord. 3. Wrap the Hose around the Telescopic Pole one 1. Screw the Pole Extension (A) onto the Telescopic Pole (B) as shown in time as shown in Figure 14.
Using Your Steamer Assembly Instructions Pressing With Steam 5. Loosen the Pole Base by turning it counter-clockwise. 6. Insert the bottom of the Telescopic Pole into the Pole Base (see Figure 6) 1. To steam a garment, place it on a clean, rust-free clothes hanger, and in such a way so that the Clothes Hanger Hook faces the rear of the place the hanger on the Clothes Hanger Hook.
Page 10
Assembly Instructions Using Your Steamer Fabric Brush Attachment 4. Place the Water Fill Tank on the Water Reservoir (see Figure 11). You should hear water flowing into the Water Reservoir for a short time. The Fabric Brush attachment is used in conjunc- tion with the Steam Nozzle.
Need help?
Do you have a question about the SF-410 and is the answer not in the manual?
Questions and answers