Related Manuals for Steamfast QuickSteam SF-465
Summary of Contents for Steamfast QuickSteam SF-465
- Page 1 Model SF-465 QuickSteam Professional by Top Innovations, Inc. Please read instructions before use. Mail in your warranty registration card.
- Page 2 Top Innovations, Inc. would like to invite you to take advantage of our Customer Support website at: On this website you will find additional information about many...
-
Page 3: Customer Support
To ensure prompt and accurate service, call for a Return Authorization number before returning any unit to Top Innovations. Failure to obtain a Return Authorization number will cause a delay in warranty or out-of- warranty service requests. -
Page 4: Important Safety Guidelines
IMPORTANT SAFETY GUIDELINES Basic safety precautions should be used when using any electrical appliance. Please read all of the following instructions before using your SF-465 QuickSteam Professional in order to reduce risk of fire, electric shock, or other injuries. 1. DO NOT leave your SF-465 QuickSteam Professional unattended when plugged in or not in use. - Page 5 9. SF-465 QuickSteam recommended SF-465 accessories. Other types of attachments such as those used with vacuum cleaners are not to be used with QuickSteam Professional. Doing so may cause injuries or damage to unit.
-
Page 6: Features And Accessories
10.) Hose Base and Electrical Plug Receptacle 11.) Hose 12.) Handle 13.) Steam Trigger 14.) Steam Nozzle 15.) Water Filter SF-465 Q UICK TEAM RODUCT Always turn unit off and unplug from electrical outlet before emptying Water Tank. ROFESSIONAL NFORMATION... - Page 7 SF-465 Q · The Pole (1) connects the Pole Top (not shown) to the main unit at the Pole Base (2). The Pole Top is comprised of the Clothes Hanger Hook and the Steam Nozzle Holder. The Clothes Hanger Hook allows you to steam garments that are hanging from a clean, rust-free hanger, while the Steam Nozzle Holder provides a safe and convenient place to hang the Steam Nozzle.
- Page 8 Assembling Pole 1. Insert Pole Top into middle section of Pole and rotate it clockwise to tighten the two sections together (FIGURE 1). 2. Slide Screw Knob over top of bottom Pole section. It will come to rest on stopper ring towards bottom of Pole section (FIGURE 2). 3.
- Page 9 Attaching Hose and Electrical Inlet NOTE: Unplug unit from electrical outlet before attaching Hose and Electrical Inlet. 1. Flip up cover on main unit to expose Electrical Plug Receptacle. Attach Hose and Electrical Inlet to Hose Base on main unit, lining up electrical plugs on Inlet with slots on Electrical Plug Receptacle on unit (FIGURE 7).
-
Page 10: Auto Shut Off
WARNING: Always unplug unit from electrical outlet before 1. Fill Water Tank with cool water. To prolong the lifetime of your QuickSteam Professional, we recommend using distilled or de-mineralized water. 2. Plug unit into a properly grounded three-pronged electrical outlet, and set Lighted On/Off Switch to “On”... - Page 11 SING YOUR STEAMING FABRIC CAUTION: Be careful when handling garments on Clothes Hanger Hook. Pulling on the garment with too much force may cause unit to tip over. 1. To steam garment, place it on clean, rust-free clothes hanger, and place hanger on Clothes Hanger Hook.
- Page 12 1. Set Lighted On/Off Switch to “Off” position. 2. Unplug Power Cord from electrical outlet. 3. Wrap Hose loosely around Pole one time. 4. Hang Steam Nozzle from Steam Nozzle Holder. 5. Roll QuickSteam CLEANING AND LONG-TERM STORAGE It is recommended that you follow this procedure at least once per week. Use of distilled or de-mineralized water reduces the need for cleaning and prolongs the lifetime of your QuickSteam 1.
-
Page 13: Removing Mineral Buildup
One common problem with steamers is mineral build-up caused by a high mineral content in many municipal water supplies. Mineral residue inside of internal pipes and heater can cause intermittent steaming or, in some cases, no steaming at all. NOTE: To reduce or eliminate occurrence of mineral build-up we recommend use of de-mineralized or distilled water in unit. -
Page 14: Troubleshooting
PROBLEM Unit fails to steam. Light on the On/Off Switch does not illuminate. Unit fails to steam. Light on the On/Off Switch does illuminate. Water drips from nozzle. Excessive gurgling of Hose and Steam Nozzle. Steam output is intermittent. NOTE: It is normal for unit to periodically stop steaming for a few seconds. -
Page 15: Warranty Information
ONE YEAR LIMITED WARRANTY (If outside USA, additional shipping charges may apply) Top Innovations, Inc. warrants this product to be free from defects in material and workmanship for a period of one (1) year from the date of purchase. This... - Page 16 Top Innovations, Inc. 400 NW Platte Valley Dr. Riverside, MO 64150 Tel: (800) 711-6617 www.topinnovations.com sales@topinnovations.com Printed In China V030710...
Need help?
Do you have a question about the QuickSteam SF-465 and is the answer not in the manual?
Questions and answers