Yamaha PSR-S970 Owner's Manual page 96

3
Use the TAB [E][F] buttons to call up the desired page.
For details about each page, refer to the Reference Manual on the website.
• VOL/VOICE......Changes the Voice for each part and adjusts panning and vol-
• FILTER..............Adjusts the Harmonic Content (resonance) and sound bright-
• TUNE ................Pitch-related settings (tuning, transpose, etc.).
• EFFECT............Selects the effect type and adjusts the depth for each part.
• EQ .....................Boosts/cuts the high band or low band for each part to correct
• MEQ ..................Selects the master equalizer type applied to the entire sound
• CMP ..................This is the Master Compressor setting which determines the
4
Use the [A] – [J] buttons to select a parameter, then use the
[1 ] – [8 ] buttons to set the value for each part.
5
Save your Mixing Console settings.
• To save the PANEL display settings:
Register them to Registration Memory (page 85).
• To save the STYLE display settings:
Save them as Style data. If you want to recall the settings for future use, select the
Style file saved here.
1. Call up the operation display.
[FUNCTION]
2. Press the [EXIT] button to close the RECORD display.
3. Press the [I] (SAVE) button to call up the Style Selection display, then
save it (page 28).
• To save the SONG display settings:
First register the edited settings as part of the Song data, then save the Song. If
you want to recall the settings for future use, select the Song file saved here.
1. Call up the operation display.
[FUNCTION]
2. Use the TAB [E][F] buttons to select the SETUP tab.
3. Use the [8 ] (APPLY) buttons to actually apply the settings.
4. Press the [I] (SAVE) button to call up the Song Selection display, then
save it (page 28).
Advanced Features
Refer to the Reference Manual on the website, Chapter 9.
96
PSR-S970/S770 Owner's Manual
ume for each part.
ness.
the tone or timbre of the sound.
and edit the related parameters.
dynamics of the overall sound.
 
TAB [F] MENU 2 [A] STYLE CREATOR
 
TAB [F] MENU 2 [B] SONG CREATOR
NOTE
The MEQ and CMP settings are not
applied to audio playback or the met-
ronome sound.
NOTE
You can instantly set the same value
for the parameter to all of the parts, if
you simultaneously hold down one of
the [A] – [J] buttons and use the [1
] – [8 ] buttons (or the Data
dial).