Af Point Selection - Canon EOS 5Ds Instruction Manual

Hide thumbs Also See for EOS 5Ds:

Table of Contents

Selecting the AF Point Manually

You can manually select the AF point or zone.

When [24: Initial AF pt,

selected] (p.128), you can use this method to manually select the AI

Servo's AF starting position.

When you press the <S> button, the LCD panel displays the following:

• 61-point automatic selection AF and Zone AF:

• Single-point Spot AF, Single-point AF, and AF point expansion: SEL

(Center)/SEL AF (Off-center)

S Selecting the AF Area and AF PointN

Press the <S> button.

The AF points will be displayed in the

In AF point expansion modes,

adjacent AF points will also be

In the Zone AF mode, the selected

zone will be displayed.

Select an AF point.

The AF point selection will change in

the direction you tilt <9>. If you

press <9> straight down, the center

AF point (or center zone) will be

You can also select a horizontal AF

point by turning the <6> dial and

select a vertical AF point by turning

the <5> dial.

In the Zone AF mode, turning the

<6> or <5> dial will change the

zone in a looping sequence.

AI Servo AF] is set to [Initial