Canon EOS 5Ds Instruction Manual page 386

w Printing
e Adjusting Printing Effects
Brightness
The image brightness can be adjusted.
Adjust levels
When you select [Manual], you can change
the histogram's distribution and adjust the
image's brightness and contrast.
With the Adjust levels screen displayed, press
the <B> button to change the position of
the < >. Turn the <5> dial to freely adjust
h
the shadow level (0 - 127) or highlight level (128 - 255).
kBrightener
Effective in backlit conditions where the subject's face looks dark.
When [On] is set, the face will be brightened for printing.
Red-eye corr.
Effective in flash images where the subject has red eyes. When [On]
is set, the red eye will be corrected for printing.
The [ Brightener] and [Red-eye corr.] effects will not be reflected on
k
the screen.
When [Detail set.] is selected, you can adjust the [Contrast],
[Saturation], [Color tone], and [Color balance]. To adjust the [Color
balance], use <
green. The image's color balance will be adjusted towards the color in
the direction of the move.
If you select [Clear all], all the printing effect settings will be reverted to
their defaults.
386
In step 4 on page 384, select the printing
effect. When the <ze> icons are
displayed brightly, you can press the
<B> button. You can then adjust the
printing effects. What can be adjusted or
what is displayed will depend on the
selection made in step 4.
>. B is for blue, A for amber, M for magenta, and G for
9