Canon EOS 5Ds Instruction Manual page 467

5: Set-up 3 (Yellow)
Video system
Battery information
Sensor cleaning
z button display
options
Custom Quick Control
m button function
Communication
settings
When using GPS device or a Wireless File Transmitter, be sure to check
the countries and areas of use, and use the device in accordance with
the laws and regulations of the country or region.
Note that when connecting GPS Receiver GP-E2 (sold separately) with a
cable, preparations as below are necessary.
- Update the GP-E2's firmware to Version 2.0.0 or later. (Using the cable
for connection is not possible with the firmware version earlier than
Version 2.0.0.)
- Interface Cable IFC-40AB II or IFC-150AB II (both sold separately)
must be used.
When using the GP-E2 attached to the hot shoe, preparations as above
are not necessary. For how to update the GP-E2's firmware, refer to the
Canon website.
For NTSC / For PAL
Power source / Remaining capacity / Shutter
count / Recharge performance / Battery
registration / Serial number / Battery history
Auto cleaning f: Enable / Disable
Clean now f
Clean manually
Displays camera settings / Electronic level / Quick
Control screen / Custom Quick Control screen
Customize the functions and layout for Quick
Control screen
Rating / Protect
Displayed when Wireless File Transmitter
WFT-E7 (Ver. 2, sold separately) is attached.
Menu Settings
Page
297
351
446
374
377
442
427
337
336
-
467