Table of Contents
Advertisement
3-11 Miscellaneous Control
This section is for setting CPU Miscellaneous Control.
Auto Detect PCI Clock
Spread Spectrum
CPU Clock Ratio
** Current Host Clock
Host Clock at Next Boot
** Current DRAM CLOCK
DRAM Clock at Next Boot
1.5VSUS Select
Vccp Select
Vcc1.5 Select
VDIMM Select
Flash Part Write Protect
↑↓→← Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
CPU Clock Ratio
This item allows you to select the CPU ratio.
Auto Detect PCI/DIMM Clock
This item allows you to enable/disable auto detect PCI/DIMM Clock.
The settings are: Enabled, Disabled.
Spread Spectrum
This item allows you to set the Spread Spectrum.
Host/PCI Clock at Next Boot is
This item allows you to select the CPU/PCI Clock.
By press PageDown/PageUp key you can change the CPU Host/PCI Clock
When jumper setting CPU Host Clock 66MHz you can choose 66/33∼99/49MHz
When jumper setting CPU Host Clock 100MHz you can choose 100/33∼132/44MHz
When jumper setting CPU Host Clock 133MHz you can choose 133/33∼200/50MHz
3-12 Load Standard/Optimized Defaults
Load Standard Defaults
When you press <Enter> on this item, you get confirmation dialog box with a message similar
to:
Load Standard Defaults (Y/N)? N
Pressing <Y> loads the BIOS default values for the most stable, minimal-performance system
operations.
Load Optimized Defaults
When you press <Enter> on this item, you get a confirmation dialog box with a message
similar to:
Load Optimized Defaults (Y/N)? N
Pressing <Y> loads the default values that are factory settings for optimal performance
system operations.
Phoenix – AwardBIOS CMOS Setup Utility
Miscellaneous Control
Enabled
Disabled
15x
100MHZ
100MHZ
266MHz **
266MHz(By SPD)
1.50(Default)
1.05(Default)
1.50(Default)
1.90V(Default)
Disabled
Menu Level >
30
Item Help
Advertisement
Table of Contents
