Table of Contents
Advertisement
Data (ESCD) when you exit Setup if you have installed a new add-on and the system
reconfiguration has caused such a serious conflict that the operating system can not boot.
The settings are: Enabled and Disabled.
Resource Controlled By
The Award Plug and Play BIOS has the capacity to automatically configure all of the boot
and Plug and Play compatible devices. However, this capability means absolutely nothing
unless you are using a Plug and Play operating system such as Windows ® 95/98. If you set
this field to "manual" choose specific resources by going into each of the sub menu that
follows this field (a sub menu is preceded by a ">").
The settings are: Auto(ESCD), Manual.
IRQ Resources
When resources are controlled manually, assign each system interrupt a type, depending on
the type of device using the interrupt.
PCI/VGA Palette Snoop
Leave this field at Disabled. The settings are Enabled, Disabled.
3-10 PC Health Status
This section shows the Status of you CPU, Fan, Warning for overall system status. This is
only available if there is Hardware Monitor onboard.
Shutdown Temperature
Smart FAN Configuration
Show PC Healthy in Post
Vcore
+1.5V
+5V
+12V
5VSB
VDIMM
+3.3V
VBat
CPU Temperature
System Temperature
CPUFAN
SFAN1 speed
SFAN2 speed
↑↓→← Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
Current FAN1, FAN2 Speed/CPU Vcore/3.3V/+12V/Internal VCC
This will show the CPU/FAN/System voltage chart and FAN Speed.
Phoenix – AwardBIOS CMOS Setup Utility
PC Health Status
Disabled
Disabled
Enabled
1.07V
1.00V
4.96V
11.96V
4.91V
1.90V
3.26V
3.28V
48/118F
35/95F
6849RPM
0RPM
0RPM
Menu Level >
29
Item Help
Advertisement
Table of Contents
