Snmp Commands - Monarch 7411 Operating Instructions Manual

S N M P C o m m a n d s
CLear SNMP CONtact <string>
Removes SNMP SysContact.
CLear SNMP LOCation <string>
Removes SNMP SysLocation.
SET SNMP GETCOMM
Gets SNMP community.
SET SNMP SETCOMM1 <string> or SET SNMP SETCOMM2 <string>
Set SNMP community 1 or community 2 name.
Note: An incoming set request can use either name for comm1 or comm2.
SET SNMP CONtact
Set SNMP SysContact.
SET SNMP LOCation <string>
Sets SNMP SysLocation.
SET SNMP JETADmin [EN|DIS]
Selects whether to use the JetAdmin protocol.
<string>
<string>
Telnet Console Commands 6-15