Monarch 7411 Operating Instructions Manual page 62

Syntax:
Help set ip
IP LPD/TCP Parameters
ADdress aa.bb.cc.dd
ARP [EN/DI]
BAnner [EN/DI]
CHKSUM [EN/DI]
BOot n
ENable/DISable
FTIme [EN/DI]
FTP [EN/DI]
HTTP [EN/DI]
KEepalive n
LPD [EN/DI]
MEthod <type>
PIng aa.bb.cc.dd
PRObe [EN/DI]
RANge [EN/DI/ALL] aa.bb.cc.dd {MAx ee.ff.gg.hh}
RARp flags nn
REtry [EN/DI]
ROuter aa.bb.cc.dd
SUbnet aa.bb.cc.dd
TCP [EN/DI]
TELnet [EN/DI]
TFTP [EN/DI]
TImeout n
TRAP n [ADDR/PORT/TRIG]
WIndow nn
Displays a list of the available help commands for "Set IP."
6-4 Ethernet Operating Instructions
IP node address
IP set via ARP
LPD banner printing
IP receive checksum
Number of DHCP/BOOTP tries
Enable or Disable IP Processing
Fast timeout
FTP protocol
HTTP protocol
Keepalive interval (min)
LPD protocol
Set method of getting IP address
Test connection to IP host
TCP connection probes
1=no subnet, 2=no router, 3=neither
LPD retry continuation
Default router address
Subnet mask
Raw TCP (9100) protocol
TELNET protocol
TFTP protocol
Inactivity timeout (minutes)
TRAP configuration
LPD/TCP maximum window size