Ibm Aix Configuration - Monarch 7411 Operating Instructions Manual

I B M A I X C o n f i g u r a t i o n
To configure a print server on IBM AIX 4.x, use the SMIT program as follows:
Enter smit and select Devices.
1.
Select Printer/plotter.
2.
3. Select Manage remote printer subsystem.
4. Select Client services.
5. Select Remote printer queues.
6. Select Add a remote queue. Enter the following remote queue settings:
♦ Name of queue to add (user selectable) Activate the queue (Yes).
♦ Destination host (print server's IP address; or if you have configured the
/etc/hosts file, use the name of the print server that you specified in that
file).
♦ Name of queue on remote printer BINARY_P1 for binary files or TEXT_P1
for text files).
♦ Name of device to add (user selectable; for example lp0).
7. You should now be able to print using the normal lp -d command.
Notes:
♦ The configuration for earlier versions of AIX is slightly different.
♦ The print server can also be configured as a JetDirect card using AIX. To
do this, refer to your AIX documentation.
Management Methods 3-7