Black & Decker BDSBC20A Original Instructions Manual

Black & Decker BDSBC20A Original Instructions Manual

Hide thumbs Also See for BDSBC20A:


New Zealand


Table of Contents

Summary of Contents for Black & Decker BDSBC20A

  • Page 1 Ireland Australia New Zealand...
  • Page 4: Intended Use

    Intended use Do not use the appliance if any part is damaged or defective. Your Black & Decker battery charger is designed to charge Have any damaged or defective parts repaired or lead-acid batteries. This product is intended for household, replaced by an authorised repair agent.
  • Page 5 When disposing of batteries, follow the instructions Preparation before charging given in the section "Protecting the environment". The appliance must only be connected to a 12 V lead-acid Add distilled water in each cell until the battery acid battery. Before charging, confirm that the voltage of the reaches the level specified by the battery manufacturer.
  • Page 6 Be aware that engine components e.g. the coolant fan Connect the negative (-) black clamp to the chassis or a may start automatically. Keep hands and body away solid non-moving metal vehicle component or body part. from engine components and position the battery Never clamp directly to the negative battery terminal or charger and cables to prevent contact.
  • Page 7 Plug the unit into an ac source and during the Autoselect technology initialisation sequence, press the language button (2) Select the application and the charger will do the rest. once; pressing the language button repeatedly allows 4-Stage charging technology (fig. D) you to choose your language.
  • Page 8: Troubleshooting

    Part 1 (no load) Warning! When a second attempt at starting an engine is Make sure that there is no load on the alternator by required, a five minute cooling down period is necessary turning off all the vehicles accessories. before attempting to re-start the engine.
  • Page 9: Protecting The Environment

    OVERTIME CONDITION - When this message is displayed, Keep the battery charger cords loosely coiled during the charging cycle has exceeded 18 hours; this condition storage to prevent damage to the cords. may occur because of the following: Mains plug replacement (U.K. & Ireland only) The battery being charged is defective.
  • Page 10: Ec Declaration Of Conformity

    Alternatively, a list of authorised Black & Decker repair agents and full details of our after- EC declaration of conformity sales service and contacts are available on the Internet at: BDSBC20A TYPE1, BDSBC25A TYPE1, BDSBC30A TYPE 1 Please visit our website to Black &...
  • Page 11 BDSBC10A - BDSBC20A TYP. BDSBC25A - BDSBC30A Partial support - Only parts shown available Nur die aufgefuerten teile sind lieferbar Reparation partielle - Seules les pieces indiquees sont disponibles Supporto parziale - Sono disponibili soltanto le parti evidenziate Solo estan disponibles las peizas listadas...
  • Page 12 90540693 L-09/08...

This manual is also suitable for:


Table of Contents