Intended use Power cord safety Warning! Never alter the ac cord or plug. If it will not fit, have Your Black & Decker battery charger is designed to charge lead- a proper outlet installed by a qualified electrician. Improper acid batteries. This product is intended for household, consumer connection may result in an electric shock.
Page 4
Make sure that the initial charging rate does not exceed the Do not use power tools in the charging area. battery manufacturer's requirement. Do not smoke or have a naked flame in the charging area. Warning! Risk of explosive gas mixtures. Working in the Follow the instructions for connecting and disconnecting vicinity of a lead-acid battery is dangerous.
Page 5
Features Charging a battery disconnected from the circuit. Warning! Incorrect connection, battery short circuit, location of 1. Charge rate selector switch battery and location of the battery charger may create a hazard. 2. Charging indicators Make sure that adequate preparation has been made before 3.
Remove the nuts from the bolts of the battery terminal's Troubleshooting connectors (fig. B). If the appliance is not charging: Install the red ring terminal (4) to the bolt of the positive Check that the battery charger is properly connected to a battery terminal connector and replace the nut.
Internet at: Internet at: www.2helpU.com. www.2helpU.com Technical data Please visit our website www.blackanddecker.co.uk to BDV080 register your new Black & Decker product and to be kept up Input voltage to date on new products and special offers. Further Rated input information on the Black &...
Need help?
Do you have a question about the BDV080 and is the answer not in the manual?
Questions and answers