10 AMP SMART ® FULLY AUTOMATIC BATTERY CHARGER INSTRUCTION MANUAL Catalog Number BCS10B...
• To reduce the risk of battery explosion, follow these instructions and those published by the battery manufacturer and SAFETY GUIDELINES / DEFINITIONS manufacturer of any equipment you intend to use in the vicinity of the battery. Review cautionary markings on these products and on the engine.
Charger Location INTRODUCTION 1. Locate charger as far away from battery as cables permit. Thank you for selecting the 10 Amp Battery Charger. With proper care and use, it will give you years of dependable service. This 2. NEVER place charger directly above battery being charged; gases from battery will corrode and damage charger. battery charger has a high charge rate of up to 10 amps.
SMART CHARGE Fault Message Explanation/Recommendation 1. Set up the unit as described in the “Setting Up the Unit” section, selecting the Smart Charge function before connecting the OVERTIME CONDITION The charging cycle has exceeded 18 hours. This may occur under the following clamps to the battery.