Black & Decker BDV1085 Instruction Manual

Black & Decker BDV1085 Instruction Manual

Hide thumbs Also See for BDV1085:


New Zealand


Table of Contents

Summary of Contents for Black & Decker BDV1085

  • Page 1 Ireland Australia New Zealand...
  • Page 3: Intended Use

    Intended use Power cord safety Warning! Never alter the ac power cord or plug. If it will not fit, Your Black & Decker battery charger is designed to charge have a proper outlet installed by a qualified electrician. Improper lead-acid batteries. This product is intended for household, connection may result in an electric shock.
  • Page 4 overfill. For a battery without cell caps (maintenance free), Position the battery charger as far away from the battery as carefully follow the manufacturer's charging instructions. the leads will allow. The battery charger contains switches Study all the battery manufacturer's specific precautions, that may create a spark.
  • Page 5: Use

    To reduce the risk of electric shock, disconnect the If the battery is not already removed from the circuit, follow appliance from any power source before attempting the manufacturers' instructions to remove the battery before maintenance or cleaning. Turning off controls without charging.
  • Page 6 predetermined voltage. During this phase, the charging Equalize pushbutton (9). This is a recessed voltage remains constant, while the charging current is pushbutton used to start the equalize process. reduced to allow for the maximum proper internal chemical energy transfer. Control panel LEDs (fig.
  • Page 7 Pressing the 2/10/30A pushbutton (15) again advances the is used, the more undercharged it becomes; thus the more charging rate to 10 A, and pressing the pushbutton once frequently the battery should be equalized. more advances the charging rate to 30 A. (Pressing the Do not use this mode on sealed or valve regulated batteries.
  • Page 8: Maintenance

    Turn over the engine using the manufacturer's guidelines, Note: F07 may display because a number of extra accessory typically in 3 to 5 second bursts. loads have been added to the charging system, thereby increasing current demand from the alternator. Make sure The high current engine starting function requires a resting/ that the alternator is rated to support the application.
  • Page 9: Protecting The Environment

    Keep the battery charger cords loosely coiled during Make sure that there is ample ventilation before resuming storage to prevent damage to the cords. operation. Troubleshooting F06 - Reverse polarity Display indications, common problems and possible F06 is displayed if the connections to the battery's positive solutions: and negative terminals are incorrect.
  • Page 10: Ec Declaration Of Conformity

    Black & Decker repair agents and full details of our after- properly. sales service and contacts are available on the Internet at: Technical data BDV1085 Please visit our website to Input voltage register your new Black & Decker product and to be kept up Rated input to date on new products and special offers.
  • Page 12 90507193 12/06...

Table of Contents