Camera Operation (Optional); Rear Camera Operation; Menu Screen - Alpine X801D-U Owner's Manual

Camera Operation
(Optional)
When an optional camera is connected, the view video of camera can be
output to the monitor.
Front camera or Rear camera can be connected to this unit.
Make the Camera Select setting (Front, Rear or Other) according to your
connected camera. For details, see "Setting the Camera Input" (page 45).
Front camera:
When the HCE-C257FD is connected, conditions in front of the
vehicle, such as objects, people and other hazards, can be seen.
Rear camera:
If an HCE-C127D/HCE-C157D/HCE-C252RD camera is connected,
when the vehicle is reversed, the rear camera view (guide marks for
vehicle width and available distance) is displayed automatically on
the screen of this unit.
Other camera:
Set when connecting to a camera other than the Front camera or Rear
camera, such as a room camera and side camera.
You can adjust the quality of the camera image.
Setting items: Brightness / Colour / Contrast
See "Visual Setup" (page 37).

Rear Camera Operation

Displaying the Rear Camera Image from the

Menu screen

1
Press the MENU button.
The menu screen is displayed.
• You can also display the menu screen by touching [
on the lower part of the Audio source screen or by swiping upward.
2
Touch [Camera].
The Rear Camera view is displayed.
• Touch the screen while the camera image is being displayed, and touch
[ ] or [ ] to return to the main source screen or previous screen.
• You can perform a Guide Adjustment. For details, see "Adjusting the
Rear/Front Camera Guide" (page 46).
84
-EN
[Camera] button
Displaying the rear view video while the car is
in reverse
1
Shift the gear lever to the reverse (R) position.
The rear view image is displayed while the car remains in
reverse.
2
If you shift the gear lever to a position other than reverse
(R), the monitor returns to the previous screen.
• Never depend solely on the camera when backing up. Always turn and
look and only use the camera for additional assistance.
• This function is effective when the reverse wire is properly connected.
• You can perform a Guide Adjustment. For details, see "Adjusting the
Rear/Front Camera Guide" (page 46).
Switching the Image Pattern for the Rear
Camera
If the camera has a view switch function, the Direct Change switch is
displayed.
1
Touch the screen when the image from the rear camera is
displayed.
The operation screen is displayed on the screen.
• After a 5-second time-out, the operation screen returns to the
camera display screen.
2
Touch [Back], [Panorama], [Corner] or [Top].
The image pattern changes.
[Back]: Rear View
[Panorama]: Panorama View
[Corner]: Corner View
[Top]: Ground View
• For detailed information about image patterns, see the camera Owner's
Manual.
• You can perform a Guide Adjustment. For details, see "Adjusting the
Rear/Front Camera Guide" (page 46).
Guide Display ON/OFF Setting
1
Touch the screen when the image from the camera is
displayed.
The operation screen is displayed on the screen.
• After a 5-second time-out, the operation screen returns to the
camera display screen.
2
Touch [Guide Off] on the Rear camera display screen.
The guide disappears, and then the [Guide Off] switch changes
to [Guide On].
]
3
Touch [Guide On] to turn on the guide.
Adjusting the Caution Display Location
1
Touch the screen when the image from the camera is
displayed.
The operation screen is displayed on the screen.
• After a 5-second time-out, the operation screen returns to the
camera display screen.
2
Touch [ Caution].
• For each touch, the caution location moves to the top or bottom of the
screen.